NIVOCAP C–200 with rod probe

(Capacitive Level Sensors)

5 years warranty
Explosion protection
Plug-in display
High temperature version
PACTware™

2-wire compact capacitive level sensor for distance, level and volume measurement of liquids, powders, granules, with er > 1.5 relative dielectric constant, with partially or fully plastic-coated stainless steel rod probe

Type
C

Version / Max. temperature
C
										Transmitter / max. +266 °F
										Transmitter with plug-in display / max. +266 °F
										High-temperature transmitter / max. +392 °F
										High-temperature transmitter with plug-in display / max. +392 °F

Process connection size / Insulation
C
										¾" BSP / Fully PFA-insulated stainless steel
										¾" NPT / Fully PFA-insulated stainless steel
										1" BSP / Fully PFA-insulated stainless steel
										1" BSP / Partially PFA-insulated stainless steel
										1" NPT / Fully PFA-insulated stainless steel
										1" NPT / Partially PFA-insulated stainless steel
										1½" BSP / Fully PFA-insulated stainless steel
										1½" BSP / Partially PFA-insulated stainless steel
										1½" NPT / Fully PFA-insulated stainless steel
										1½" NPT / Partially PFA-insulated stainless steel
										1" TriClamp / Fully PFA-insulated steel
										1½" TriClamp / Fully PFA-insulated steel
										2" TriClamp / Fully PFA-insulated steel

Housing
C
										Painted aluminum
										Fiberglass-reinforced plastic (PBT)
										Stainless steel

Probe length
C

Fully PFA-insulated
	02	7.85"
	nn	11.8…120"; sold by the 4"
Partially PFA insulated
	02	7.85"
	nn	11.8…120"; sold by the 4"
nn = 03…30 : 1…10 ft

Output / Certificates
C
										4…20 mA
										4…20 mA + HART^®
										4…20 mA / Ex ia G
										4…20 mA + HART^® / Ex ia G

Available on request: special process connections
	X12 DN40 Pipe coupling (DIN 11851)
	X12 DN50 Pipe coupling (DIN 11851)

Accessories

NIFIT EAA

316Ti stainless steel adapters

Type
E	A	A		1				0		Adapter

Design
E	A	A		1				0		Internal receiving thread – External process thread (Not applicable for TriClamp)

Inner connection
E	A	A	1	0
					¼" BSP
					¼" NPT
					½" BSP
					½" NPT
					¾" BSP
					¾" NPT
					M20x1.5
					1" BSP
					1" NPT
					1¼" NPT
					1½" BSP
					1½" NPT
					2" BSP
					2" NPT
					¾" TriClamp
					1" TriClamp
					1½" TriClamp
					2" TriClamp
					2½" TriClamp
					3" TriClamp

Outer connection
E	A	A	1	0
					¼" BSP
					¼" NPT
					½" BSP
					½" NPT
					¾" BSP
					¾" NPT
					M20x1,5
					1" BSP
					1" NPT
					1¼" NPT
					1½" BSP
					1½" NPT
					2" BSP
					2" NPT
					¾" TriClamp
					1" TriClamp
					1½" TriClamp
					2" TriClamp
					2½" TriClamp
					3" TriClamp

Material
E	A	A		1				0		316Ti

UNICOMM SAT–504 HART®-USB/Bluetooth® modem

HART®–USB/Bluetooth® communication modem for transmitters with HART® output. USB 1.1 Type-B connector and KLEPS2 clip-on probes.

Type
S	A	T		5	0	4				HART^®-USB/Bluetooth^® modem

Function
S	A	T	5	0	4
						HART^® modem with USB Laptop connection
						HART^® modem with USB Laptop connection + power supply for transmitter
						HART^® modem with USB and Bluetooth^® Laptop connection + power supply for transmitter
						HART^® modem with USB Laptop connection + power supply for transmitter + service port
						HART^® modem with USB and Bluetooth^® Laptop connection + power supply for transmitter + service port

UNICOMM SAK–305 HART®-USB/RS485 modem

DIN rail mountable HART®–USB communication modem for transmitters with HART® output. Connection to PC via USB/RS485 interface.

Type
S	A	K		3	0	5				HART^®-USB/RS485 modem

Ex
S	A	K	3	0	5
						HART^®-USB/RS485 modem
						HART^®-USB/RS485 modem / Ex ia G

UNIDISP SAP–200

Plug-in dot-matrix graphic display is designed for 2-wire transmitters. It provides clear field indication of the measured value and a bargraph display.

Label
S	A	P	2	0	0
						Module with label for 2-wire and S-400 EchoTREK
						Module with label for NIVOCAP, THERMOCONT, UNICONT PD

UNIMOUNT SAB–112 plastic shielding cap

3D printed plastic shielding cap, snap-on design for plastic cover

Type
S	A	B		1	1	2		0		3D printed plastic shielding cap, snap-on design for plastic cover

UNIMOUNT SAB–113 plastic shielding cap

3D printed plastic shielding cap, snap-on design for aluminum cover

Typ
S	A	B		1	1	3		0		3D printed plastic shielding cap, snap-on design for aluminum cover

UNIMOUNT SAB–211 Stainless steel shielding cap

Stainless steel shielding cap, clamp-type design, for all instrument covers

Typ
S	A	B		2	1	1		2		Stainless steel shielding cap, clamp-type design, for all instrument covers

Order code