MicroTREK H–700 with cable probe, with interface function

(Guided Wave Radar Level Sensor (GWR))

5 years warranty
Explosion protection
Plug-in display
High temperature version
PACTware™

2-wire compact GWR/TDR level sensor with interface function with stainless steel mono or twin cable probe with or without plastic coating

Type
H

Version / Temperature
H
										Transmitter / Flange temperature max. +194 °F
										High-temperature transmitter / Flange temp. max. +392 °F (M type only up to +302 °F)
										Transmitter with plug-in display / Flange temperature max. +194 °F
										High-temperature transmitter with plug-in display / Flange temp. max. +392 °F (M type only up to +302 °F)

Probe / Process connection
H
										Mono cable, ⌀0.15", 316 / 1" BSP / max. 100 ft
										Mono cable, ⌀0.15", 316 / 1" NPT / max. 100 ft
										Mono cable, ⌀0.15", 316 / 1½" BSP / max. 100 ft
										Mono cable, ⌀0.15", 316 / 1½" NPT / max. 100 ft
										Mono cable, ⌀0.15", 316 / 1½" TriClamp / max. 100 ft
										Mono cable, ⌀0.15", 316 / 2" TriClamp / max. 100 ft
										Mono cable, ⌀0.3", 316 / 1½" BSP / max. 100 ft
										Mono cable, ⌀0.3", 316 / 1½" NPT / max. 100 ft
										Twin cable, 2x ⌀0.15", 316 / 1½" BSP / max. 100 ft
										Twin cable, 2x ⌀0.15", 316 / 1½" NPT / max. 100 ft
										Mono cable, ⌀0.15", + FEP-coated / 1" BSP / max. 100 ft
										Mono cable, ⌀0.15", + FEP-coated / 1" NPT / max. 100 ft
										Mono cable, ⌀0.15", + FEP-coated / TriClamp 1½" / max. 100 ft
										Mono cable, ⌀0.15", + FEP-coated / Sanitary DN40 / max. 100 ft
										Mono cable, ⌀0.15", + PFA/FEP fully coated / DN50, PN25, 316Ti + PFA/FEP lining

Housing
H
										Painted aluminum
										Fiberglass-reinforced plastic (PBT) (Ex version not available)
										Stainless steel

Probe length / Material
H

	nn	3.3…100 ft (each 3.3 ft), for mono cable, ⌀0.15 inch / 316
	nn	3.3…100 ft (each 3.3 ft), for mono cable, ⌀0.3 inch / 316
	nn	3.3…100 ft (each 3.3 ft), for twin cable / 316
	nn	3.3…100 ft (each 3.3 ft), for mono cable, ⌀0.15 inch / 316 + FEP
nn = 01…30 : 1,0…30,0 m

Output / Certificates
H
										4…20 mA + HART^®
										4…20 mA + HART^® / Ex ia G (plastic-coated probes Ex ia IIB only)
										4…20 mA + HART^® + SPDT Relay
										2x 4…20 mA + HART^®
										2x 4…20 mA + HART^® / Ex ia G (plastic-coated probes Ex ia IIB only)

Process connections (price information on request)
	DIN and ANSI flanges
	DN40 Pipe coupling (DIN 11851)

Process seal material (factory default: FPM)
	EPDM
	FFKM
The above process connections and process seals are ordered separately and must be specified in the text part of the order!

Accessories

UNIDISP SAP–300

Type
S	A	P		3	0	0		0		Graphic plug-in display module

UNICOMM SAT–504 HART®-USB/Bluetooth® modem

HART®-USB communication modem for transmitters with HART® output USB 1.1 “B” connector and test clip

Type
S	A	T		5	0	4				HART^®-USB/Bluetooth^® modem

Function
S	A	T	5	0	4
						HART^® modem with USB Laptop connection
						HART^® modem with USB Laptop connection + power supply for transmitter
						HART^® modem with USB and Bluetooth^® Laptop connection + power supply for transmitter
						HART^® modem with USB Laptop connection + power supply for transmitter + service port
						HART^® modem with USB and Bluetooth^® Laptop connection + power supply for transmitter + service port

UNICOMM SAK–305 HART®-USB/RS485 modem

DIN-rail-mountable HART®-USB communication modem for transmitters with HART® output Connection to PC: USB/RS485 interface

Type
S	A	K		3	0	5				HART^®-USB/RS485 modem

Ex
S	A	K	3	0	5
						HART^®-USB/RS485 modem
						HART^®-USB/RS485 modem / Ex ia G

UNICOMM SAT–506 eLINK Modul

eLINK unit for software/firmware updates for datalogger reading with type "B” mini USB connector. Can be plugged in the socket of the SAP display module. Provides galvanically isolated power and communication to the device, capable of high-speed program loading.

Type
S	A	T		5	0	6				eLink Module

Function
S	A	T	5	0	6
						eLink plug-in unit
						eLINK plug-in unit, for data logger readout only

UNIMOUNT SAB–112 plastic shielding cap

3D printed plastic shielding cap, snap-on design for plastic cover

Type
S	A	B		1	1	2		0		3D printed plastic shielding cap, snap-on design for plastic cover

UNIMOUNT SAB–113 plastic shielding cap

3D printed plastic shielding cap, snap-on design for aluminum cover

Typ
S	A	B		1	1	3		0		3D printed plastic shielding cap, snap-on design for aluminum cover

UNIMOUNT SAB–211 Stainless steel shielding cap

Stainless steel shielding cap, clamp-type design, for all instrument covers

Typ
S	A	B		2	1	1		2		Stainless steel shielding cap, clamp-type design, for all instrument covers

Order code