EchoTREK SE–300 2-wire, max. 26 ft

(Compact Ultrasonic Level Transmitters for Liquids)

5 years warranty
Explosion protection
Plug-in display
PACTware™

2-wire compact ultrasonic level transmitters for liquids with PP, PVDF or PTFE transducer; Ingress protection: IP67 (NEMA 6 equivalent)

Range / Frequency
S	3
		0.65…13 ft / 80 kHz (only for 1½" process connection)
		0.82…20 ft / 80 kHz (only for 2" process connection)
		1.15…26 ft / 60 kHz (only for 2" process connection)

Version
S	3
		Transmitter
		Transmitter with plug-in display

Housing / Transducer material
S	3
		Fiberglass-reinforced plastic (PBT) / Polypropylene (PP)
		Fiberglass-reinforced plastic (PBT) / PVDF
		Fiberglass-reinforced plastic (PBT) / PTFE
		Painted aluminum / Polypropylene (PP)
		Painted aluminum / PVDF
		Painted aluminum / PTFE
		Stainless steel / Polypropylene (PP)
		Stainless steel / PVDF
		Stainless steel / PTFE

Process Connection
S	3
		BSP thread
		NPT thread

Output / Certificates
S	3
		4…20 mA + Data logging feature
		4…20 mA
		4…20 mA + HART^® + Data logging feature
		4…20 mA + HART^®
		4…20 mA + Data logging feature / Ex ia G
		4…20 mA / Ex ia G
		4…20 mA + HART^® + Data logging feature / Ex ia G
		4…20 mA + HART^® / Ex ia G
		4…20 mA + Data logging feature + SPDT Relay
		4…20 mA + SPDT Relay
		4…20 mA + HART^® + Data logging feature + SPDT Relay
		4…20 mA + HART^® + SPDT Relay

Accessories

NIVOSONAR SFA Flanges

Plastic flanges for ultrasonic level transmitters, Material: Polypropylene (PP)

Type
S	F	A		3						Flanges

Flange size
S	F	A	3
DIN flanges, PN16
				DN80 PN16
				DN100 PN16
				DN125 PN16
				DN150 PN16
				DN200 PN16
				DN250 PN16
				DN300 PN16
				DN350 PN16
FF ANSI flanges, 150 psi
				3" FF 150 psi
				4" FF 150 psi
				5" FF 150 psi
				6" FF 150 psi
				8" FF 150 psi
				12” FF 150 psi
				14” FF 150psi
JIS flanges, 10K
				80A (as per 10K)
				100A (as per 10K)
				125A (as per 10K)
				150A (as per 10K)
				200A (as per 10K)
				300A (as per 10K)
				350A (as per 10K)

Flange type
S	F	A	3
				⌀1.4" hole (for units with 1" BSP process connection)
				For units with 2" BSP process connection
				For units with 2" NPT process connection
				For mounting to SAA-102 aiming device
				For units with 1½" BSP process connection
				For units with 1½" NPT process connection

Version
S	F	A		3
										Standard hole

UNIDISP SAP–200

Plug-in dot-matrix graphic display is designed for 2-wire transmitters. It provides clear field indication of the measured value and a bargraph display.

Label
S	A	P	2	0	0
						Module with label for 2-wire and S-400 EchoTREK
						Module with label for NIVOCAP, THERMOCONT, UNICONT PD

UNICOMM SAT–504 HART®-USB/Bluetooth® modem

HART®–USB/Bluetooth® communication modem for transmitters with HART® output. USB 1.1 Type-B connector and KLEPS2 clip-on probes.

Type
S	A	T		5	0	4				HART^®-USB/Bluetooth^® modem

Function
S	A	T	5	0	4
						HART^® modem with USB Laptop connection
						HART^® modem with USB Laptop connection + power supply for transmitter
						HART^® modem with USB and Bluetooth^® Laptop connection + power supply for transmitter
						HART^® modem with USB Laptop connection + power supply for transmitter + service port
						HART^® modem with USB and Bluetooth^® Laptop connection + power supply for transmitter + service port

UNICOMM SAK–305 HART®-USB/RS485 modem

DIN rail mountable HART®–USB communication modem for transmitters with HART® output. Connection to PC via USB/RS485 interface.

Type
S	A	K		3	0	5				HART^®-USB/RS485 modem

Ex
S	A	K	3	0	5
						HART^®-USB/RS485 modem
						HART^®-USB/RS485 modem / Ex ia G

UNIMOUNT SAC mounting bracket

Adjustable wall mounting bracket for continuous and point level sensors with 1", 1½" and 2" mounting connections. Material: stainless steel. Extensions: Aluminum.

Type
S	A	C		1		1		0		Mounting brackets

Extension
S	A	C	1	1	0
						With no extension. Length to sensor center: 7.4" (188 mm)
						With 1 extension. Length to sensor center: 16.1" (409 mm)
						With 2 extensions. Length to sensor center: 27.56" (700 mm)
						With 3 extensions. Length to sensor center: 39.02" (991 mm)

UNIMOUNT SAC Basic unit

Basic unit

Type
S	A	C		1	0	0		0		Wall mounting part. Stainless steel

UNIMOUNT SAC Extension element

Extension element, 300 mm (×1)

Type
S	A	C		2	1	0		0		Single extension. Paint coated Aluminum

UNIMOUNT SAC Accessory set

Accessory set (1" suspension element + plate for 1", 1½" and 2" connection damping gland sponge washer + screw set)

Type
S	A	C		2	0	1		0		Sensor mounting plate

UNIMOUNT SAB–112 plastic shielding cap

3D printed plastic shielding cap, snap-on design for plastic cover

Type
S	A	B		1	1	2		0		3D printed plastic shielding cap, snap-on design for plastic cover

UNIMOUNT SAB–113 plastic shielding cap

3D printed plastic shielding cap, snap-on design for aluminum cover

Typ
S	A	B		1	1	3		0		3D printed plastic shielding cap, snap-on design for aluminum cover

UNIMOUNT SAB–211 Stainless steel shielding cap

Stainless steel shielding cap, clamp-type design, for all instrument covers

Typ
S	A	B		2	1	1		2		Stainless steel shielding cap, clamp-type design, for all instrument covers

Order code